Show your home some love this Valentine's Day. Home weatherization is a good move for every season.
From air sealing to improving ventilation to adding insulation, home weatherization helps homeowners save money by saving energy.
Windows and doors
Reducing leaks around windows, doors and chimneys in your home will result in considerable annual energy savings. Caulking and weatherstripping are two simple and effective air-sealing techniques that offer quick returns on investment, often one year or less. Caulk is generally used for cracks and openings between stationary house components such as around door and window frames, and weatherstripping is used to seal components that move, such as doors and operable windows.
Insulation in your home provides resistance to heat flow. The more heat flow resistance your insulation provides, the lower your heating and cooling costs. Properly insulating your home not only reduces heating and cooling costs, but also improves comfort. To get started, here are some basic tips:
- Older structures may be under-insulated since the amount of insulation in ceilings, walls, and floors is often determined by the building or energy code requirements mandated at the time the structure was built.
- Check to see if your attic and basement (or crawl space) have a sufficient level of insulation.
- Consider adding insulation when embarking on a home remodeling project.
- Install pipe insulation on all exposed hot water pipes.
- Install pipe insulation on the first three feet of exposed cold water pipe connected to the water heater.
Heating and cooling
Heating and cooling your home is the largest single factor in your energy bill. These heating and cooling tips can help you to increase the efficiency. To get started, here are some basic tips:
- Identify places that heat escapes from your home. Check for gaps and holes that allow heat to escape, raising your heating bills and making your home drafty and less comfortable.
Check your furnace filter(s) monthly. During the heating season (also during the cooling season if you use air conditioning). The proper time interval for replacing or cleaning filters will vary depending on the rate of accumulation of pet hair, dust, and carpet lint in your home. Consider joining our automatic Filter Renewal Program. Call 800-398-4663 for details.
- Lower your thermostat. On average, for each degree you consistently lower your thermostat, your heating energy consumption drops by two percent. Therefore, keep your thermostat at the lowest comfortable setting (68 degrees or lower). Look into a programmable thermostat to help automate your heating and cooling system.
- Seal your home’s unheated spaces. If ductwork goes through an unheated basement, attic or crawl space, check for leaky joints or disconnected sections. Seal leaky joints with latex duct mastic or foil backed butyl tape. Reconnect any loose sections, seal, and support.
- Install weather stripping and door sweeps along with caulking any exposed cracks or missing seals. For a no-cost fix, roll up a bath towel and hold it against the bottom of the door with a weight.
- Replace caulking around your home’s windows to reduce air leaks. Use non-hardening “rope caulk” to temporarily seal gaps on little-used, movable windows and sliding doors.
If your home’s windows are single-paned, consider installing inexpensive “tape-up” interior storm windows for a low-cost, temporary fix. Caution: Make sure that doors and windows can be opened as emergency exits in case of fire.
Maintenance is a time consuming task, but extremely important to protect your investment in a home-comfort system. Put your maintenance on autopilot with our Guardian Maintenance Program.
If you don’t know where to start, we recommend a comprehensive Home Energy Audit. Our 3-hour home inspection will find opportunities to save you money and you’ll also receive a 20-page report on your home’s performance. Schedule a home energy audit today.