Bryant Evolution Series Furnaces

Superior Comfort, Advanced Control and Technology to Create your Precise Temperature.

Bryant Preferred Series Furnaces

Stay Warm & Save Energy With High Performing Furnaces

Bryant Legacy Series Furnaces

Affordable Comfort & Quality Heating

Furnaces Filters

Keep Your Furnace Running Efficiently & Breathe Cleaner Air

Washington Energy Services offers the most energy efficient furnaces available today.
Ask our furnace experts how you can have the best heating system for your home, and maximize your savings from discounts and rebates.

Frequently Asked Furnace Questions

Why choose Washington Energy Services for furnace replacement?

Your Own Furnace Specialist

To Help You Make an Informed Decision

Every home is different and the heating system for one may not be ideal for another. Your knowledgeable Home Energy Specialist will provide you with the best furnace choices and honest advice on the pros and cons of each to help you make an informed decision.

Our Home Energy Specialists do it by the book. They properly size your equipment, performing a heat loss per Washington State Energy Code and industry standards and then using the official AHRI combination ratings to select system components that mechanically match and perform at the highest efficiency levels while delivering optimum comfort.

One Contact from Beginning to End

It doesn’t stop there. Once you’ve made a decision on a furnace, they will be there to answer any of your questions throughout the entire process. You have a single contact to go to before, during and even after your furnace is installed.

100% Satisfaction Guarantee

Yes, We Trust Our Team & Products THAT Much

We back every furnace we install with our 100% Satisfaction Guarantee. If you are not completely satisfied with our product and we cannot fix it, we will simply remove our equipment and refund your money.*

The Best Installers in the Industry

Custom Installations Take Talent

Your furnace is only as good as the installation. With their extensive experience, our installers provide the best quality installation by customizing it to your home. Sometimes it may take a little longer, but we, and you, want it done right.

Each furnace technician receives a minimum of 100 hours of “on-the-job-training” each year, including factory training from Bryant, to ensure everyone is up to date and fresh on best practices.

Licensed, Bonded & Drug Tested

All of our furnace technicians undergo stringent background checks and drug screens to ensure your safety.

No Subcontractors

Keeping it in the House

We do not use subcontractors to install any furnace. Your brand new furnace will be professionally installed by Washington Energy Services employees only.

NATE Certified & Factory Trained

Details Matter

Our technicians are factory trained, and a majority of them have over 15 years in the industry. We offer a Gold Seal Installation Process that follows manufacturer installation guidelines, NATE and industry best practices and state codes. We maintain compliance to local and state codes and take out permits on every job where required.

Our technicians are NATE Certified. When choosing a company to perform the install, be sure to ask for NATE accreditation as not all companies obtain it. NATE exams reflect a consensus opinion of what technicians need to know to effectively service and install today’s sophisticated HVAC systems. Technicians should be NATE certified in the same way a doctor shouldn’t be practicing without a license. To protect consumers, NATE (North American Technician Excellence) formed as a 3rd party, non-profit, certification program for the HVAC industry. The NATE technical committee developed strict guidelines and tests that HVAC companies must pass in order to become NATE certified.

BBB Accredited & Angie’s List A Rated

A Badge you Can Trust

We’re honored to get BBB Accreditation as not every company is eligible. BBB is the resource to turn to for objective, unbiased information on businesses. Businesses must meet their high standards and we continue to live up to their Standard of Trust by emphasizing fair & honest practices for our customers.

Serving You For 55+ Years

Washington Energy Services is a Seattle heating contractor with offices in Seattle, Lynnwood and Tacoma. Our furnace replacement technicians travel throughout Western Washington to service, repair and replace Washington furnaces. While we sell Bryant brand high efficiency gas furnaces, we do repairs on all types of gas and electric furnaces.

If you are considering a new gas furnace or electric furnace to heat your home, our home energy specialists will help you evaluate the latest energy efficient furnace. To schedule an appointment, complete our request a free estimate form or call us at 1-800-398-4663.

Why is it important to have a knowledgeable expert perform calculations to size a new furnace right for my home?

Every home is unique and selecting the right size furnace for yours is important. Having the wrong size furnace reduces its life expectancy, causes the furnace to run inefficiently and affects your overall comfort. For instance, if a furnace is sized too small, it will not heat your home completely on colder days causing it to work harder to produce the same output. A furnace that is sized too large will go into what’s called “short cycle” meaning it will turn on and off too frequently. Short cycling will shorten the life of the furnace and can cause excess moisture accumulation in your home. That’s why our knowledgeable heating experts will come to your home and perform Manual J heat loss calculations to determine the best solution for your individual home. Call or fill out the free estimate form to schedule your free in-home estimate.

What is the difference between one stage, two stage & modulating operation in a furnace?

One Stage Furnace

A one stage furnace operates where the gas flame is either on or off. When your home gets below the targeted temperature, the sensor will trigger the gas flame to turn on at full force. Once the sensor indicates that it has reached the targeted temperature, the heat will shut completely off. This means your homes targeted temperature is less consistent, affecting your comfort. For instance, with a target of 70 degrees, actual temperatures in your house might range as low as 66 degrees and as high as 74 degrees. Plus, the drastic on and off requires more energy usage similar to how energy is used when turning your car on and off. You wouldn’t turn your car off at every red light because it would waste fuel starting it up constantly.

Two Stage Furnace

A two stage furnace on the other hand works more efficiently and will provide more consistent temperatures for improved comfort. For a target of 70 degrees, actual temperatures in your house might range as low as 68 degrees and as high as 72 degrees.

Modulating Furnace

A modulating furnace will provide you maximum comfort and energy efficiency. It’s like using cruise control, the furnace makes incremental changes to keep your temperature steady. No rush of high fan followed by a shut off and gradual cooling. Your furnace will automatically adjust within .5 or .65% increments of your targeted temperature setting. This type of gas furnace uses fuel most efficiently since it’s not stopping and starting.

For more information see our article on selecting a heating system.

What does AFUE mean and why is it important in selecting my furnace?

AFUE stands for annual fuel utilization efficiency. That is a measure of thermal (heating) efficiency used for combustion equipment such as furnaces and condensing boilers. The AFUE is an average for the year. The higher the number, the more energy efficient it is. For example, traditional firewood is only 45-55% AFUE, which means that a significant percentage is not used for heating, and is lost in exhaust. Propane or heating oil are typically 70-89% AFUE. When you see that a furnace says 98% AFUE, such as the Bryant Evolution 987M furnace, that means it produces 98 BTUs of heat for every 100 BTUs of natural gas you use as fuel. Which is an amazing efficiency rating.

Most utility and EnergyStar programs only provide rebates for 95% AFUE and higher because they are looking for maximum energy savings. An 80% AFUE furnace does lose 20% of it’s fuel and is less efficient, but is perfect for homes with a heat pump hybrid system, and unusual layout applications. The savings you will gain from switching from an 80% AFUE furnace to a 95% one is about 15% off of your heating costs, but it could be higher if your 80% furnace is old an losing it’s efficiency.

What furnace replacement utility rebates are available?

Utility Rebates Available As a furnace contractor with PSE and other utility programs, Washington Energy can ensure you maximize your furnace rebates.

What is the most popular equipment for heating Seattle homes?

For Seattle heating, the gas furnace tends to be the top choice. As Northwest residents have become more knowledgeable about energy efficiency, heat pumps have gained in popularity. In many city environments, ductless heat pumps are an excellent heating and cooling equipment choice, especially when replacing electric baseboard heat. They are super quiet and can work within the local noise ordinances of Seattle and surrounding areas.

Where there is space to place an air sourced heat pump, these are also ideal. They turn your furnace into an energy efficient hybrid heating and cooling system. Hybrid systems are many times more efficient than oil, propane or electric baseboard heat and you can expect to save significantly on your heating costs. Learn more about heat pump use in Seattle under our heat pump section.

Are 80% furnaces going away?

There is pending government legislation that would require most homeowners to purchase 90% AFUE furnaces or higher, exceptions need to be worked out and the laws are in court.

Looking for furnace repair?

You’ve come to the right place. If you have no heat, call us 24/7 at 800-398-4663. Yes even in the middle of the night! If you suspect your furnace is failing and need service, or wish to get a maintenance tune-up service performed on your furnace, please call during business hours or fill out the handy request for service form and we’ll call you.

Does improving the efficiency of my furnace really amount to anything?

Yes! According to EnergyStar, if every gas furnace sold in the US met the 95% efficiency recommendation of Energy Star, the savings would be about $171 million per year and annual greenhouse gas emissions would reduce by the equivalent of 177,000 cars. That’s a significant savings.
So, put our experienced professionals to work for you. Call 800-398-4663 or complete our FREE Estimate Form.
Join our Energy Solutions Newsletter and learn to make your home more efficient: